[1] Tamas, H. Optimal use of preparation machines and effects on yarn quality. Melliand Textilberichte 9/77; 701 - 705.
[2] Artzt, P., Schenek, A. and Al Ali, R. Methods of achieving better exploitation of raw material in the cotton spinning mill. Textilpraxis International 5/80; 530 - 537.
[3] Siersch, E. Ways of improving raw material utilization in cotton prespinning. International Textile Bulletin 4/81; 413 - 420.
[4] Mandl, G. Control of dust in the cotton spinning mill. Melliand Textilberichte 4/80; 305 - 308.
[5] Binder, R. Preparation and recycling of cotton waste in the spinning mill. Swiss Association of Textile Specialists (SV T), instruction course.
[6] Gilhaus, K. F. Technological reserves in the cotton spinning mill. Textilbetrieb 12/82; 25 - 28.
[7] Wirth, W. The influence of opening of cotton flocks on cleaning in the blowroom process. Textilpraxis International 2/66.
[8] Frey, M. Recycling of spinning waste and influence on yarn quality due to re-blending. Mittex 9/82.
[9] Abt, C. and Topf, W. High-performance cards and quality of combed cotton yarns. Melliand Textilberichte 4/84.
[10] Schmolke, K. H. and Schneider, U. Advances in carding of cotton from the viewpoint of the manufacturer of card clothing. Textilpraxis International 10/82; 1021 - 1025.
[11] Artzt, P., Abt, C. and Maidel, H. Carding of fine titer polyester fibers. Textilpraxis International 9/84.
[12] Wolf, B. Metallic clothing in operation in the mill. International Textile Bulletin 11/74.