Rieter

07/06/2011 - Rieter – Competence in Four Spinning Systems

Rieter – competent partner of the spinning industry –presents for the first time four spinning technologies at the ITMA 2011 in Barcelona. As the only manufacturer worldwide, Rieter offers systems for ring spinning, compact spinning, rotor spinning and air-jet spinning. Rieter leads in technological competence and technical innovations for the benefit of customers. The numerous new products at the ITMA demonstrate this. With a complete system and global service, Rieter supports its customers worldwide.

The Comfort of Competence

Rieter is the leading supplier of installations for manufacturing yarns from short staple fibers. As a competent partner, Rieter is dedicated to making customers’ lives easier by offering care and support from the initial investment discussions to the successful operation of a spinning mill. Rieter’s comprehensive know-how from fiber to yarn and further up to the finished textiles provides the basis for the development of innovative machines that deliver a consistently high yarn quality.

Valuable Systems

Rieter is the only textile machinery manufacturer able to supply all spinning processes and thus provide customers with competent and independent advice, tailored to their individual needs. The outstanding price/performance ratio, high raw material utilization and the longevity of the products make an investment in Rieter machines extremely attractive. Since the company was established in Switzerland in 1795, Rieter’s quality standards have remained at a high level. All manufacturing facilities worldwide are ISO-9001 certified.

Convincing Technology

With its comprehensive technological know-how covering all four spinning processes through to the textile end product, Rieter advises and assists customers in selecting the right spinning process. Five spinning centers, five textile laboratories and a modern training center in Winterthur are at the disposal of customers worldwide for spinning trials and training purposes.

Supportive Partnership

Numerous sales and service centers support customers throughout the world. With the installation of complete systems, following commissioning and successful operation customers can reap the benefits of a single contact for their entire spinning operations over decades.

New Products at the ITMA 2011

Rieter is presenting a range of new products at the ITMA in Barcelona in Hall 1, Stand C 118-120.

• The new VARIOline blowroom line for gentle fiber preparation, even at high production speeds and with a high level of contamination of the raw material.
• The new C 70 high-performance card, with increased performance and production quality compared to the predecessor model.
• The new RSB-D 45 draw frame with unique „mouse-free“ sliver coiling, improved operation and a further increase in quality.
• The new R 60 automatic rotor spinning machine, that achieves a productivity rise with a new spin box.
• The new J 20 air-jet machine with maximal productivity at minimal space requirement. With this new spinning process, Rieter now offers 4 spinning technologies from one source.
• A new version of SPIDERweb, the only data monitoring system that records all production and quality data for the complete Rieter system installations and that serves as a basis for production and quality increases.

With all these new products, the systems offered by Rieter from the fiber to the finished yarn are improved and supplemented. For all yarn applications and economic parameters, Rieter offers customized solutions for carded and combed ring yarns, compact yarns, rotor yarns and air-jet yarns. To simplify the investment decisions of its customers, Rieter as system supplier offers them comprehensive, independent and objective counseling for all spinning systems.

The most important system components are:

VARIOline

The blowroom line from Rieter scores with a variable concept. The cleaning process takes place in several stages that are adapted to the raw material. Smallest fiber tufts and the cleaning map VarioSet, adjustable at the touch of a button, are the key to efficient and gentle cleaning.

A 11 UNIfloc automatic bale opener

The UNIfloc A 11 automatic bale opener produces small tufts at the start of the process. The UNIfloc processes up to 1 600 kg/h of material. The A 11 is extremely flexible and can take off cotton and man-made fibers gently and efficiently.

B 12 UNIclean pre-cleaner

The B 12 UNIclean pre-cleaner is an efficient cleaning and dedusting machine that is used immediately after bale opening. Cotton and also other natural fibers can be gently cleaned and dedusted.

B 72 / B 76 UNImix homogeneous mixer

No other system achieves such intensive, homogeneous and thorough mixing in a minimum of space as the B 72 / B 76 UNImix mixing machine. With increasingly short processes and declining doubling numbers, this is more important than ever.

B 17 UNIclean

The B 17 UNIclean is designed as a cleaner for heavily contaminated natural fibers. Following the blending machine, it cleans and dedusts efficiently and gently. With VarioSet the cleaning intensity and trash extraction is precisely adjusted to the raw material.

A 81 UNIblend precision blender

The UNIblend A 81 precision blender sets the highest standard for multi-component blending with an accuracy featuring less than 1 % deviation. The UNIblend A 81 enables four different carding lines to be supplied with different blends.

A 79 UNIstore storage and feeding machine

The A 79 UNIstore combined storage, opening and cleaning machine processes natural and synthetic staple fibers up to 65 mm easily and efficiently with an output of up to 1 200 kg/h. Two versions are available: the A 79S serves to open the tufts, the A 79R additionally cleans the tufts.

C 60 high-performance card

The benchmark for quality and productivity in the carding room is the C 60 high-performance card. With a working width of 1.5 m, output by the C 60 card is up to 50% higher than on conventional models – and is combined with superior sliver quality.

C 70 high-performance card

The C 70 high-performance card achieves excellent quality values at highest production. This is based on the well-proven 1.5 m working width and maximum active carding area. Precise flats guiding and selective waste extraction allow an excellent raw material exploitation and sliver quality.

SB-D 11 single-head draw frame

The SB-D 11 is a Rieter single-head draw frame without autoleveling for delivery speeds of up to 1 100 m/min. In terms of productivity it is designed for use in line with the RSB-D 45. The striking features of this new development are its compact size, excellent sliver quality and low capital investment per kg of sliver.

SB 20 double-head draw frame

With delivery speeds of up to 1 000 m/min the SB 20 offers very large can formats: up to 1 000 mm without can changer and up to 600 mm with can changer. Belt drives instead of complex drive systems improve reliability and reduce maintenance effort.

RSB-D 22 double-head autoleveler draw frame

The RSB-D 22 double-head autoleveler draw frame produces the sliver quality well known from the RSB-D 45 at 1 100 m/min. The completely independent machine sides and autoleveling functions are a unique feature. Further advantages are reduced space requirements, low energy consumption and lower capital cost.

RSB-D 35 CUBIcan draw frame

Rectangular CUBIcans contain up to 75% more material in comparison to round cans. This reduces the operating expenses, results in quality benefits and increases the efficiency of downstream processing. The active guidance of the can bottom permits CUBIcans to be operated without springs and increases flexibility. CUBIcans protect the sliver better and are more robust than a conventional rectangular can with a lateral slit.

RSB-D 45 and SB-D 45 draw frame

High quality and productivity at delivery speeds of up to 1 100 m/min– that is what the new RSB-D 45 autoleveler draw frame and the SB-D 45 draw frame without autoleveling offer. A frequency-controlled main drive and the unique CLEANtube device for clean sliver coiling enhance customer benefits.

E 32 UNIlap combing preparation

E 32 UNIlap combing preparation combines mill-proven engineering and soundly based technology in a compact design. The three-over-three drafting system ensures high fleece quality through optimum finishing drafting and parallelization of the fibers.

E 35 OMEGAlap combing preparation

E 35 OMEGAlap with new winding belt technology is the most economical combing preparation system and the ideal prerequisite for high-performance combing.

E 26 SERVOlap

The E 26 SERVOlap automatic lap transport system guarantees careful lap transport and needs little space as it runs overhead. The system is extremely flexible in layout and allows step-by-step modernization of existing manual combing room sets.

E 66 / E 76 comber

The E 66 / E 76 combers meet the highest standards in terms of output, quality and economy. The lead in combing has been extended further through C•A•P•D500 (Computer Aided Process Development).

F 15 / F 35 roving frame

High yarn quality presupposes good preparation. The roving plays a crucial role here. The F 15 and F 35 roving frames meet this requirement by supplying consistently high-quality rovings.

G 32 ring spinning Machine

The G 32 ring spinning machine meets the needs in a way that makes investment cost effective. Developed on the basis of wide experience in ring spinning, G 32 combines economy, quality and flexibility in a manner never previously achieved. With the advantage of reduced investment costs with more spindles per machine - up to 1 440 spindles - G 32 produces excellent quality yarns with proven unique features like Ri-Q-Draft drafting system, ROBOdoff and SERVOgrip which make automated doffing possible without under winding.

G 35 ring spinning machine

The G 35 ring spinning machine is a further milestone in Rieter ring spinning technology. The functions of the mill-proven G 33 predecessor model have been augmented by new options for producing fancy yarns and core-spun yarns. Customers benefit from a powerful, high-quality machine with a wide range of spinning technology features.

K 45 compact spinning machine

The K 45 ComforSpin machine is a further milestone in compact spinning technology. The functions of the mill-proven K 44 predecessor model have been augmented by further optimizations and innovations. The lead over competitors has been extended by additional spinning technology features and a powerful, high-quality machine. With up to 1 632 spindles, it is the world’s longest compact spinning machine and offers maximum flexibility for producing high-quality yarns.

R 923 semi-automatic rotor spinning machine

The R 923 rotor spinning machine is an economical alternative for producing quality yarns in the yarn count range from Ne 2 to Ne 40.

R 60 fully automatic rotor spinning machine

The R 60 fully automatic rotor spinning machine sets new standards with innovative spinning technology and low energy consumption. It offers up to 5% higher production than other machines and an increased flexibility with up to 540 positions and optionally independent sides.

J 20 air-jet spinning machine

The J 20 air-jet spinning machine is an innovation using proven know-how in drafting and automation. The double-sided concept provides for high production flexibility. The unique yarn brings benefits in spinning, processing and for final end-users. High-speed features put this machine at the top of the productivity scale. Innovative traversing reduces wear and tear.

SPIDERweb mill monitoring system

SPIDERweb collects all quality and production data from Rieter spinning systems and serves as an informative data collection and information system for management. SPIDERweb provides clear facts and figures for economically efficient decision-making.

Download Pictures

 VARIOline
(JPG/CMYK/5.3 MB) (right mouse click, save as)
Picture: The Rieter VARIOline stands for flexibility, productivity and high fiber yield.

 A 11 UNIfloc automatic bale opener
(JPG/CMYK/6.0 MB) (right mouse click, save as)
Picture: The UNIfloc A 11 automatic bale opener produces small tufts at the start of the process.

 B 12 UNIclean pre-cleaner
(JPG/CMYK/4.5 MB) (right mouse click, save as)
Picture: The B 12 UNIclean pre-cleaner is an efficient cleaning and dedusting machine that is used immediately after bale opening.

 B 72 / B 76 UNImix homogeneous mixer
(JPG/CMYK/4.4 MB) (right mouse click, save as)
Picture: No other system achieves such intensive, homogeneous and thorough mixing in a minimum of space as the B 72 / B 76 UNImix mixing machine.

 A 81 UNIblend precision blender
(JPG/CMYK/5.5 MB) (right mouse click, save as)
Picture: The UNIblend A 81 precision blender sets the highest standard for multi-component blending.

 A 79 UNIstore
(JPG/CMYK/4.9 MB) (right mouse click, save as)
Picture: The A 79 UNIstore combined storage, opening and cleaning machine, processes natural and synthetic staple fibers.

 C 60 high-performance card
(JPG/CMYK/4.7 MB) (right mouse click, save as)
Picture: The benchmark for quality and productivity in the carding room is the C 60 high-performance card.

 C 70 high-performance card
(JPG/CMYK/4.6 MB) (right mouse click, save as)
Picture: The C 70 Card with 1.5 m width, highest active carding area and highest productivity.

 SB-D 11 single-head draw frame
(JPG/CMYK/4.5 MB) (right mouse click, save as)
Picture: The SB-D 11 is a single-head draw frame without autoleveling for delivery speeds of up to 1 100 m/min.

 SB 20 double-head draw frame
(JPG/CMYK/5.1 MB) (right mouse click, save as)
Picture: With delivery speeds of up to 1 000 m/min the SB 20 offers very large can formats: up to 1 000 mm.

 RSB-D 22 double-head autoleveler draw frame
(JPG/CMYK/4.6 MB) (right mouse click, save as)
Picture: The RSB-D 22 double-head autoleveler draw frame produces the sliver quality well known from the RSB-D 45 at 1 100 m/min.

 RSB-D 35 CUBIcan draw frame
(JPG/CMYK/3.8 MB) (right mouse click, save as)
Picture: Rectangular CUBIcans contain up to 75% more material in comparison to round cans.

 RSB-D 45 and SB-D 45 draw frame
(JPG/CMYK/5.2 MB) (right mouse click, save as)
Picture: Further enhanced quality and flexibility with the new RSB-D 45 draw frame.

 E 32 UNIlap combing preparation
(JPG/CMYK/4.3 MB) (right mouse click, save as)
Picture: E 32 UNIlap combing preparation combines mill-proven engineering and soundly based technology in a compact design.

 E 35 OMEGAlap combing preparation
(JPG/CMYK/4.2 MB) (right mouse click, save as)
Picture: E 35 OMEGAlap with new winding belt technology is the most economical combing preparation system.

 E 26 SERVOlap
(JPG/CMYK/4.7 MB) (right mouse click, save as)
Picture: The E 26 SERVOlap automatic lap transport system guarantees careful lap transport.

 E 66 / E 76 comber
(JPG/CMYK/5.6 MB) (right mouse click, save as)
Picture: The E 66 / E 76 combers meet the highest standards in terms of output, quality and economy.

 F 15 / F 35 roving frame
(JPG/CMYK/4.9 MB) (right mouse click, save as)
Picture: The F 15 and F 35 roving frames meet this requirement by supplying consistently high-quality rovings.

 G 32 ring spinning machine
(JPG/CMYK/5.7 MB) (right mouse click, save as)
Picture: The G 32 ring spinning machine meets the needs in a way that makes investment cost effective.

 G 35 ring spinning machine
(JPG/CMYK/5.8 MB) (right mouse click, save as)
Picture: The G 35 ring spinning machine is a further milestone in Rieter ring spinning technology.

 K 45 compact spinning machine
(JPG/CMYK/5.7 MB) (right mouse click, save as)
Picture: With up to 1 632 spindles, K 45 it is the world’s longest compact spinning machine.

 R 923 semi-automatic rotor spinning machine
(JPG/CMYK/5.0 MB) (right mouse click, save as)
Picture: The R 923 rotor spinning machine is an economical alternative for producing quality yarns.
 
 R 60 fully automatic rotor spinning machine
(JPG/CMYK/5.3 MB) (right mouse click, save as)
Picture: Highly-productive – the new R 60 with up to 540 rotors.

 J 20 air-jet spinning machine
(JPG/CMYK/6.1 MB) (right mouse click, save as)
Picture: J 20 Air-Jet Spinning Machine.
 
 SPIDERweb mill monitoring system
(JPG/CMYK/5.4 MB) (right mouse click, save as)
Picture: SPIDERweb mill monitoring system.

Back to: News Center