Rieter

A leading global supplier for textile machinery and components used in short staple fiber spinning

A leading global systems supplier for the production of short staple spinning mills

The global provider of components for all spinning processes

Yarns that follow fashion

Rieter offers attractive positions around the world

Yazdır

20.07.2017 - Demand picks up in the first half of 2017

  • Order intake in the first half of 2017 increases by 26% compared to the second half of 2016
  • Sales in the first half of 2017 reaches CHF 415.2 million, compared to CHF 436.9 million in the same period last year
  • EBIT of CHF 16.0 million and net profit of CHF 10.9 million at the previous year’s level
  • Acquisition of SSM – a move into adjacent fields of the textile value chain

Due to increasing demand since March 2017, Rieter posted order intake of CHF 495.2 million in the first half of 2017. This was 3% below the previous year’s level (first half year 2016: CHF 510.7 million) and with an increase of 26% was well above the second half of 2016 (CHF 394.5 million).

At CHF 415.2 million, sales were 5% down on the previous year (first half year 2016: CHF 436.9 million). On these sales, Rieter generated an EBITDA of CHF 34.8 million (first half year 2016: CHF 34.4 million) and an EBITDA margin of 8.4% (first half year 2016: 7.9%).

The order backlog rose to around CHF 545 million (December 31, 2016: around CHF 440 million). It already extends into 2018.

Sales trend by region

CHF million
January ‒
June 2017
January ‒
June 2016
Change
Change
in local
currencies
Sales
415.2

436.9
-5%
-5%
Asian countries1
111.2
152.3
-27%
-26%
China
83.8
105.1
-20%
-18%
India
94.7
81.5
16%
14%
Turkey
49.1
31.7
55%
56%
North and South America
42.7
45.4
-6%
-7%
Europe
17.9
15.5
15%
16%
Africa
15.8
5.4
191%
191%
1 Not including China, India and Turkey

In the period under review, Rieter achieved the most significant sales in Asian countries (not including China, India and Turkey) with a total of CHF 111.2 million. The decline in sales compared to the previous year was mainly due to reduced shipments to Bangladesh and Vietnam. The order intake recorded in the period showed a positive development. It was significantly above the accomplished sales and benefited from the dynamism of the Central Asian countries.

In China, sales declined by 20% compared to the first half of 2016, to CHF 83.8 million, with one third of sales generated in Xinjiang province. Order intake was slightly below sales. In the second quarter of 2017, Rieter recorded increasing demand for the model R 36 of the semi-automatic rotor spinning machine, which was introduced in 2016.

In India, at CHF 94.7 million, sales exceeded the previous year’s level by 16%. This is mainly due to the delivery of compact spinning machines K 42 and EliTe compact spinning systems, which were ordered in the second half of 2016. While the first months were characterized by restraint due to the “demonetarization” at the end of 2016, demand in the second half of the semester was increasingly robust.

In Turkey, with sales of CHF 49.1 million, Rieter generated growth of 55% compared to the previous year, which was attributable to the delivery of orders from the previous year’s period. The hesitant recovery in the last two months of the reporting period meant that order intake was below the level of sales.

In terms of sales and order intake, the North and South America and Africa regions were characterized by large individual orders in the machinery business.

Business groups

CHF million
January ‒
June 2017
January ‒
June 2016
Change
Change
in local
currencies
Order intake
495.2

510.7
-3%
-3%
Machines & Systems
325.2
343.4
-5%
-5%
After Sales
77.7
71.2
9%
9%
Components
92.3
96.1
-4%
-3%
Sales
415.2
436.9
-5%
-5%
Machines & Systems
255.1
256.9
-1%
0%
After Sales
70.1
70.7
-1%
-1%
Components
90.0
109.3
-18%
-17%

The Machines & Systems Business Group benefited from growing demand since March 2017. At CHF 325.2 million, order intake was down 5% on the previous year (first half year 2016: CHF 343.4 million). Here, Machines & Systems succeeded in largely compensating for the low level of order intake from Turkey by fulfilling projects from other regions, in particular thanks to orders for the ring spinning machine G 32. In addition, the first orders were booked for the further developed air-jet spinning machine J 26.

In the first half of 2017, Machines & Systems achieved sales of CHF 255.1 million, thereby roughly matching the level of the previous year (first half year 2016: CHF 256.9 million). As a result of the cost reduction measures implemented in Winterthur (Switzerland), Machines & Systems significantly improved the loss on the EBIT level, from CHF –12.1 million (first half year 2016) to CHF –3.8 million in the first half of 2017.

The order intake of the After Sales Business Group showed positive growth. Thus, order intake increased by 9% to CHF 77.7 million (first half year 2016: CHF 71.2 million). Sales were stable at CHF 70.1 million (first half year 2016: CHF 70.7 million). Continued investments in the expansion of the business meant that, at CHF 12.8 million, the business group’s EBIT in the first half of 2017 fell slightly below the previous year’s level (first half year 2016: CHF 13.2 million).

The Components Business Group also benefited from growing demand since March 2017. At CHF 92.3 million, order intake was below the first half of 2016 (CHF 96.1 million), but significantly higher than the second half of 2016 (CHF 82.3 million). The lower order intake in the second half of 2016 led to a corresponding decline in sales in the first half of 2017, to CHF 90.0 million, compared to an extraordinarily strong comparison period (first half year 2016: CHF 109.3 million). Product mix and the resulting lower utilization of individual plants led to an EBIT decline to CHF 12.6 million in the first half year (first half year 2016: CHF 18.4 million).

As of June 30, 2017, the Rieter Group had 5 232 employees (June 30, 2016: 5 067 employees). This figure includes the newly added employees of SSM Textile Machinery. In addition, as of June 30, 2017, Rieter had 652 temporary employees (June 30, 2016: 574 temporary employees).

Operating result and net profit

Rieter’s first half year in 2017 was characterized by improved profitability in the Machines & Systems Business Group, a stable result for After Sales and a weaker result in Components. EBIT reached CHF 16.0 million, which compared to the previous year corresponds to a slightly higher margin of around 3.9% of sales (first half year 2016: CHF 15.7 million and 3.6%, respectively). In the first six months of 2017, Rieter achieved a net profit of CHF 10.9 million, thereby reaching the previous year’s level (first half year 2016: CHF 11.0 million).

Acquisition of SSM Textile Machinery

On June 30, 2017, Rieter acquired the SSM Textile Machinery Division (SSM) from Schweiter Technologies AG in Horgen, Switzerland. SSM is the world’s leading supplier of precision winding machines in the fields of dyeing, weaving and sewing thread preparation and enjoys success in individual segments of filament yarn production. The business has been attached to Rieter’s Components Business Group as an independent unit.

The purchase price for SSM of CHF 124.2 million consists of an enterprise value of CHF 100.2 million and cash and cash equivalents of CHF 24.0 million and was financed from existing funds. The transaction costs of CHF 1.9 million related directly to the acquisition, of which CHF 1.3 million was incurred in the first half of 2017 and CHF 0.6 million in the 2016 financial year, were recorded in the income statement.

Free cash flow and balance sheet

The Group reported a free cash flow of CHF –125.6 million (first half year 2016: CHF 4.5 million) during the reporting period. This development is mainly due to the cash outflow of CHF 100.2 million for the acquisition of SSM Textile Machinery and a temporary increase in net working capital. After payment of a dividend of CHF 22.6 million (CHF 5.00 per share) out of legal capital reserve in April 2017, as at June 30, 2017, cash and cash equivalents, marketable securities and time deposits amounted to CHF 207.5 million and net liquidity to CHF 101.3 million.

Rieter had an equity ratio of 43.8% on the balance sheet date (June 30, 2016: 43.8%).

Improvement program STEP UP

In the first half of 2017, Rieter again focused on innovations, after sales excellence and increasing profitability.

Innovations: Rieter is specifically focused on the development of new products and services. The single-head draw frame generation RSB-D 50, which was successfully introduced in 2016, registered strong demand in the second quarter of 2017. In the first half of 2017, the Group invested a total of CHF 22.8 million in research and development. This corresponds to 5.5% of sales.

After Sales Excellence: The After Sales Business Group aims to increase sales to CHF 166 million by 2018, representing growth of 30% compared to 2014. In the period under review, Rieter continued to work on this target as planned. Thus, spare parts logistics were contracted out to a service provider within the framework of a European solution, which will allow Rieter to achieve a significant reduction in delivery times. At the same time, Rieter opened a service branch in Kahramanmaraş, to support its customers in the south east of Turkey with an even faster and better service. The order intake of CHF 77.7 million in the first half of 2017 underlines the growth ambitions.

Increasing Profitability: As announced on February 1, 2017, Rieter plans to relocate production from the Ingolstadt site in Germany to the Ústí site in the Czech Republic. Rieter is currently negotiating with the employees’ representatives.

Outlook

In the first half year, demand for components, spare parts and services was stable and order intake for new machines increased.

Despite the still low visibility, Rieter assumes that demand will develop at the level of the first half year in the coming months.

The acquisition of SSM Textile Machinery will make a positive contribution to sales and EBITDA in the second half of 2017.

Overall in 2017, Rieter expects slightly higher sales than in the previous year and an EBIT slightly below the previous year (before restructuring costs), due to the product and country mix.

At the appropriate time, Rieter will provide information on the restructuring costs associated with the reorganization concept for the Ingolstadt site in Germany, which was announced on February 1, 2017.

 

Telephone conference for investors and analysts

In the context of the publication of the half-year results, a telephone conference for investors and analysts will take place today, July 20, 2017, at 11.00 am (CEST):

Dial-in details:
Europe: +41 58 310 50 00
UK: +44 203 059 58 62
USA: +1 631 570 56 13
China: +86 400 120 23 19
India: +91 446 688 60 46

Presentation material

The media release, the semi-annual report and the investor presentation can be found at:
 Press release semi-annual results 2017 (English/PDF/90 KB)
 Semi-annual report 2017 (English/PDF/1.1 MB)
 Media and Investor Presentation, Half Year 2017 (English/PDF/705 KB)

Forthcoming dates

Trading update 2017: October 27, 2017
Publication of sales 2017: January 31, 2018
Deadline for proposals regarding the agenda of the Annual General Meeting: February 22, 2018
Results press conference 2018: March 13, 2018
Annual General Meeting 2018: April 5, 2018

For further information please contact:

Rieter Holding Ltd.

Rieter Management Ltd.

Investor Relations
Media Relations
Joris Gröflin
Chief Financial Officer
T +41 52 208 70 15
F +41 52 208 70 60
investor@rieter.com
www.rieter.com
Relindis Wieser
Head Group Communication
T +41 52 208 70 45
F +41 52 208 70 60
media@rieter.com
www.rieter.com

 

About Rieter

Rieter is the world's leading supplier of systems for short-staple fiber spinning. Based in Winterthur (Switzerland), the company develops and manufactures machinery, systems and components used to convert natural and manmade fibers and their blends into yarns. Rieter is the only supplier worldwide to cover spinning preparation processes as well as all four end spinning processes currently established on the market. With 18 manufacturing locations in ten countries, the company employs a global workforce of some 5 230, about 20% of whom are based in Switzerland. Rieter is listed on the SIX Swiss Exchange under ticker symbol RIEN.  www.rieter.com

 Rieter at a glance

CHF million
January ‒
June 2017
July ‒
December 2016
January ‒
June 2016
Change1

Rieter

Order intake
495.2
394.5
510.7
-3%
Sales
415.2
508.1
436.9
-5%
Operating result before interest, taxes, depreciation and amortization (EBITDA)
34.8
61.4
34.4
1%
- in % of sales
8.4%
12.1%
7.9%
Operating result before interest and taxes (EBIT)
16%
40.8
15.7
2%
- in % of sales
3.9%
8.0%
3.6%
Net profit
10.9
31.7
11.0
-1%
- in % of sales
2.6%
6.2%
2.5%
Basic earnings per share (CHF)
2.39
6.97
2.42
-1%
Purchase of tangible fixed and intangible assets
7.7
20.2
10.7
-28%
Number of employees (excluding temporaries) at the end of the reporting period
5 2322
5 022
5 067
3%

Machines & Systems Business Group
Order intake
325.2
248.2
343.4
-5%
Sales
255.1
346.5
256.9
-1%
Operating result before interest and taxes (EBIT)
-3.8
15.7
-12.1
-69%
- in % of sales
-1.5%
4.5%
-4.7%

After Sales Business Group
Order intake
77.7
64.0
71.2
9%
Sales
70.1
70.9
70.7
-1%
Operating result before interest and taxes (EBIT)
12.8
12.3
13.2
-3%
- in % of sales
18.3%
17.3%
18.7%

Components Business Group
Orders received
92.3
82.3
96.1
-4%
Sales
90.0
90.7
109.3
-18%
Total segment sales
128.8
130.0
141.3
-9%
Operating result before interest and taxes (EBIT)
12.6
16.7
18.4
-32%
- in % of segment sales
9.8%
12.8%
13.0%
1 Change January ‒ June 2017 vs. January ‒ June 2016
2 Including number of employees of SSM Textile Machinery

Disclaimer

All statements in this report which do not refer to historical facts are forecasts for the future which offer no guarantee whatsoever with respect to future performance; they embody risks and uncertainties which include – but are not confined to – future global economic conditions, exchange rates, legal provisions, market conditions, activities by competitors and other factors which are outside the company’s control.